Calrec Artemis, Installation And Technical Manual

Page: 84 / 124

84 ARTEMIS
Digital Broadcast Production Console
Setup & Configuration
The control surface display brightness
can be adjusted and the surface
enters a screen saver / 'Dark Mode'
after a period of inactivity.
During dark mode, the displays are
switched off, but all control and audio
processing continues. The displays
will instantly switch on if any control is
changed. Touching a fader knob (without
even moving the fader) will activate its
touch sensor and bring the surface out
of dark mode straight away, without
changing control parameters. A 'Dark'
button/LED on the monitor panel flashes
to indicate when the console is in this
mode.
Pressing the Dark button on the monitor
panel will also put the console into this
mode, without waiting for the timeout.
The above settings can be
accessed from the main application,
>System Settings>Surface Illum
page. Note that the maximum dark mode
timeout is 1 hour and cannot be disabled.
SCREENSAVER TIMEOUT - 'DARK-MODE'