CAE Healthcare Fidelis Lucina, User Manual

Page: 321 / 390

Müse Parameter Descriptions
293
Heart Rate Factor
The Heart Rate Factor parameter is used to change the baseline heart rate before physiological
controls are taken into account. A value of 2 doubles the baseline heart rate, while a value of 0.5
decreases the heart rate by 50%. Use this parameter to raise or lower the heart rate.
Default : 1
Range: 0.10 - 4.00
Cardiac Rhythm
The Cardiac Rhythm parameter is used to change the patient’s underlying cardiac rhythm displayed
on the Patient Status Display or TouchPro patient monitor. To change the cardiac rhythm, click the
Cardiac Rhythm parameter and select the desired rhythm from the available list. If a number appears
following the cardiac rhythm on the list, this overrides the heart rate to the rate indicated.
For cardiac rhythms without a number, the Heart Rate Factor parameter can be used to independently
control the heart rate.
Default : Modeled
Options: Modeled
Asystole
Atrial Enlargement, Left
Atrial Enlargement, Right
Atrial Fibrillation
Atrial Fibrillation: HR 120
Atrial Fibrillation: HR 80
Atrial Flutter
Atrial Flutter: HR 150
Atrial Tachycardia
AV Block, First-Degree
AV Block, Second-Degree - Mobitz I
AV Block, Second-Degree - Mobitz II
AV Block, Third-Degree
Bundle Branch Block, Incomplete Right
Bundle Branch Block, Left
Bundle Branch Block, Left with PVC 25%
Bundle Branch Block, Right
Hypercalcemia