CAE Healthcare Fidelis Lucina User Manual Download Page 117

Page: 117 / 390

Using Müse

The Interventions menu appears.

The Interventions Menu

Interventions are organized by type, or all available interventions are listed
under

ALL INTERVENTIONS

2. Navigate through the menus to find the desired intervention.

3. Once the desired intervention has been located, click the intervention’s

name from the list.

The Intervention Options menu appears, showing the available options for

the selected intervention.

The Intervention Options Menu

4. Click the desired option.

The intervention is applied and appears in the patient’s physiology.

Summary of Contents for Fidelis Lucina







































































































































































































































































































































































































Search results

Summary of Contents for Fidelis Lucina

Reviews:

Related manuals for Fidelis Lucina

Brands by name

Popular brands

CAE Healthcare Fidelis Lucina, User Manual

Search results

Summary of Contents for Fidelis Lucina

Reviews:

Related manuals for Fidelis Lucina

Brands by name

Popular brands