CAE Healthcare Fidelis Lucina, User Manual

Page: 276 / 390

Care and Maintenance
248
WARNING: If the simulator is still in use, ensure that the AC adapter is plugged into the simulator and a
working power source prior to removing both batteries.
To charge the simulator batteries using the external battery charger:
1. Locate the battery compartment cover on the left side of the maternal mannequin’s
torso.
2. Pull down on the silver security pin and pull the cover away from the torso.
The Battery Compartment and Ports with Cover
The cover is removed and the batteries are visible in the mannequin.
3. Remove the batteries from the simulator by pulling on the tabs and lifting the
batteries out of the battery compartment.
NOTE: Ensure that the battery tab is accessible and not tucked into the battery
compartment.
4. Plug the external charger into a power source.
5. Insert the batteries into the external charger charging station.
Batteries require approximately four hours to fully charge.
NOTE: Batteries will lose charge over time when left in a stored, unused
simulator. When storing the simulator for an extended amount of time,
remove the batteries from the simulator.
The security
pin