CAE Healthcare Fidelis Lucina, User Manual

Page: 145 / 390

Using Müse
117
CTG Data
The patient’s CTG data is displayed on the SCE Editor and can be reviewed using the CTG Review
buttons in the lower left corner of the CTG strip.
The SCE Editor
The CTG data represents the fetal heart rate and uterine activity measured by electrical monitors prior
to the start of the SCE. This data can be reviewed on the CTG monitor while the SCE is running.
CTG data can be added to a custom SCE in one of two ways:
1. By selecting an existing SCE with the desired CTG data to create a new SCE:
a. Select SCE with desired CTG data.
b. Run the SCE for two minutes.
c. From the Patient menu, click Save .
The Save a copy of the Patient window appears.
d. Enter a new patient name and select the duration of CTG data to be
included.
NOTE: The maximum duration is dependent on the length of the
CTG data from the original SCE.
e. Click Save .
f. Stop the SCE.
The Home screen appears.
g. From the SCE Selection panel, select New SCE .
h. Locate the recently created new patient and click Create .
The SCE Overview screen appears with the desired CTG data.
OR
2. By creating CTG data and applying it to a new SCE. To use this method:
CTG data
The CTG Review
buttons