CAE Healthcare Fidelis Lucina, User Manual

Page: 323 / 390

Müse Parameter Descriptions
295
ST Elevation with Chest Pain
Torsade de Pointes
Trifascicular Block
Ventricular Fibrillation, Coarse
Ventricular Fibrillation, Fine
Ventricular Tachycardia
Ventricular Tachycardia, Pulseless
Ventricular Tachycardia, HR 151
Ventricular Tachycardia, Pulseless HR 151
Wellen’s Syndrome
WPW Syndrome, Left Lateral Pathway
Arterial Catheter
The arterial pressure displayed on the Patient Status Display or TouchPro software is set using this
parameter. A non-pulsatile, “zero” pressure signal is emitted when the Atmosphere position is selected
and can be used to simulate zeroing a pressure transducer. This may also be used to remove the arterial
pressure waveform, if desired. The
Left Ventricle position is useful for simulating cardiac
catheterization procedures, or for demonstrating left ventricular end-diastolic pressure and its
relationship to pulmonary artery occlusion (“wedge”) and central venous pressure.
Default : Peripheral Artery
Options: Atmosphere
Peripheral Artery
Left Ventricle
Central Venous Catheter
The venous pressure displayed on the Patient Status Display or TouchPro software is set using this
parameter. A non-pulsatile, “zero” pressure signal is emitted when the Atmosphere position is selected
and can be used to simulate zeroing a pressure transducer. This may also be used to remove the central
venous pressure waveform, if desired (e.g., beginning of an SCE with an “unmonitored” patient).
Default : Right Atrium
Options: Atmosphere
Extrathoracic Vein
Intrathoracic Vein
Right Atrium