CAE Healthcare Fidelis Lucina, User Manual

Page: 120 / 390

Using Müse
92
The Jump to State menu appears, displaying the available states.
The Jump to State Menu
4. Select the desired state.
The scenario transitions to the selected state and the state is highlighted
on the Scenario screen.
NOTE : Double-click on the states to expand to the full view.
5. Click the Close Window button to return to the Run screen.
Pausing Labor
When a vaginal delivery SCE begins running, labor may start automatically or may be paused initially,
depending on the selection made in the Patient Baseline when the SCE was created.
NOTE: The default setting is that labor will be paused when SCE begins running.
If labor is paused when the SCE begins, labor can be started at any time by clicking the Resume
Delivery button in the upper right corner of the Müse screen.
The Delivery Controls
When a vaginal delivery labor is in progress, the delivery clock counts down to delivery.
NOTE: The delivery time is an estimate based on the current position on the descent mechanism and
the constant selected rate of descent; the delivery time does not take into account the contractions.
Therefore, the clock will always reach 0 before the fetus is delivered. The higher the descent rate, the
more difference there will be between the clock reaching 0 and the actual delivery. The time left on the
delivery clock is driven by the patient’s physiology and may change if certain parameters, such as
Contraction Frequency and Rate of Descent , are modified.
Once the fetus is in position for delivery and can be retrieved from the maternal mannequin, the event
is logged as “fetus released from the birthing mechanism”.
The Resume Delivery button
The Delivery Clock