CAE Healthcare Fidelis Lucina, User Manual

Page: 340 / 390

Müse Parameter Descriptions
312
Contraction Resting Tone
The Contraction Resting Tone parameter determines the uterine pressure level when there are no
active contractions. This parameter is defined in units of mmHg. The contraction resting tone has
some variability. The magnitude of this variability is determined by the UA Noise parameter.
Default : 10 mmHg
Range : 0 mmHg - 100 mmHg
Contraction Frequency Variability
The Contraction Frequency Variability parameter determines the variability present in the frequency
of uterine contractions. This parameter is defined as a percentage.
Default : 100%
Range : 0% - 100%
Contraction Amplitude Variability
The Contraction Amplitude Variability parameter determines the variability present in the amplitude
of uterine contractions. This parameter is defined as a percentage.
Default : 100%
Range : 0% - 100%
UA Noise
The UA Noise parameter determines the noise present in the uterine pressure signal. This parameter is
defined as a percentage.
Default : 100%
Range : 0% - 100%
TOCO Amplitude Gain
The TOCO Amplitude Gain parameter modifies the amplitude of the uterine contractions in the
transabdominal-uterine-activity signal only. This parameter is defined as a percentage.
Default : 100%
Range : 0% - 200%
FHR Baseline
The FHR Baseline parameter determines the baseline of the fetal heart rate signal. When set to
modeled, the baseline will be dependent on the fetus’ oxygen levels and arterial blood pressure. When
overridden, the fetal heart rate will still be susceptible to accelerations and early decelerations. This
parameter is defined in beats per minute (bpm).
Default : Modeled
Range : 30 bpm - 240 bpm