CAE Healthcare Fidelis Lucina User Manual Download Page 277

Page: 277 / 390

Care and Maintenance

249

Charging the Fetus Battery

To charge the fetus battery using the USB charger:

1. Connect the USB charger cord (provided by CAE Healthcare) to the back of the fetus.

The Back of the Fetus

2. Connect the other end of the USB charger cord to a USB power source.

The USB Charger Cord

NOTE:

A USB AC power adapter may be used to plug the USB cord into a

power outlet.

Batteries require approximately 4 to 6 hours to fully charge. The batteries
charge at a slower rate when the fetus is powered on during charging.

The USB charger

connection

The USB

charger cord

Summary of Contents for Fidelis Lucina







































































































































































































































































































































































































Search results

Summary of Contents for Fidelis Lucina

Reviews:

Related manuals for Fidelis Lucina

Brands by name

Popular brands

CAE Healthcare Fidelis Lucina, User Manual

Search results

Summary of Contents for Fidelis Lucina

Reviews:

Related manuals for Fidelis Lucina

Brands by name

Popular brands