CAE Healthcare Fidelis Lucina User Manual Download Page 115

Page: 115 / 390

Using Müse

b. Choose a route of administration to administer a custom dose.

The Medication Dose Menu

The Custom Dose Administration menu appears.

The Custom Dose Administration Menu

5. Enter the desired dose and click the

Administer

button.

The dose is applied and appears in the patient’s physiology. The

medication selected also appears in the Medication Monitor.

NOTE

: Not all medications affect the patient’s physiology, but all are

logged.

Using the Interventions Palette

There are two ways to perform and/or administer interventions using the Interventions palette: using a

Quick Link or using the complete

Interventions

menu. Quick Links are preconfigured interventions

The custom

dose options

The

Administer

button

Summary of Contents for Fidelis Lucina







































































































































































































































































































































































































Search results

Summary of Contents for Fidelis Lucina

Reviews:

Related manuals for Fidelis Lucina

Brands by name

Popular brands

CAE Healthcare Fidelis Lucina, User Manual

Search results

Summary of Contents for Fidelis Lucina

Reviews:

Related manuals for Fidelis Lucina

Brands by name

Popular brands