CAE Healthcare Fidelis Lucina, User Manual

Page: 39 / 390

Setup
11
Step 2: Power on the Maternal Mannequin
To power on the maternal mannequin:
a. Prior to powering on the simulator, ensure the Fidelis Lucina mannequin
has fully charged batteries inserted into the left side of the torso or the
power cord is attached on the right side of the torso.
b. Locate the power button on the right side of the Fidelis Lucina
mannequin’s torso.
c. Press and release the power button.
The button illuminates when the mannequin is powered on.
The Mannequin Power Button and Power Cord
IMPORTANT : Wait three (3) minutes while the simulator establishes a wireless network before
attempting to connect to the instructor workstation. Failure to wait will prevent proper connection if
the user attempts to make a direct Ethernet connection to the simulator network. The mannequin
should say, “Hello” when it is ready to be used with the Müse software.
The Power
button
The Power
cord