CAE Healthcare Fidelis Lucina, User Manual

Page: 284 / 390

Care and Maintenance
256
d. Disconnect the syringe from the port and discard the water.
3. Place the split septum adapter back on the luer fitting.
Cleaning the Genitourinary System
To clean the genitourinary system:
1. Ensure a urinary catheter is inserted and place the exposed end of the
catheter in a basin to catch the fluid.
2. If distilled water tinted with food coloring was used, fill the syringe with
50 mL clear distilled water and flush the water through the GU filling tool
connected to the
Urinary port located on the torso baffle inside the
mannequin. Continue to flush clear water through until the waste water is
completely clear.
3. Fill the syringe with air and slowly push air through the GU filling tool
connected to the Urinary port until no more water drains into the basin.
4. Disconnect the GU filling tool from the Urinary port and remove the
urinary catheter.
Cleaning the Rectum
To clean the rectum:
1. Remove the rectal plug from back of lower torso.
2. Fill a syringe with distilled water and push water through the anus.
3. Repeat as necessary until suppositories are extracted (if applicable).
4. Insert the rectal plug back in place.
Draining Condensation from the Simulator
As part of a regular preventive maintenance schedule, condensation should be drained from the
simulator.
Depending on environmental conditions, moisture may condense inside the compressed air lines and
tanks within the simulator. It is recommended that this fluid be drained every 40 hours of operation. In
outside, high humidity conditions, the system should be drained more frequently.