Bull Escala BL460, Problem Determination And Service Manual, Page: 98 / 266

78
Escala BL460 - Problem Determination and Service Guide
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
there maining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
C103A3xx
Hypervisor data structures are being
transferred to system storage
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C103A400
Special purpose registers are loaded
and instructions are started on the
system processors
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C103A401
Instructions have been started on the
system processors
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C116C2xx
System power interface is listening for
power fault events from SPCN. The last
byte (xx) will increment up from 00 to
1F every second while it waits.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C162E4xyy
VPD is being collected; yy indicates the
type of device from which VPD is being
collected
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1645300
Starting a data synchronization
operation between the primary service
processor and the secondary service
processor.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .