Bull Escala BL460, Problem Determination And Service Manual, Page: 167 / 266

Chapter 2. Diagnostics
147
2.5 Error logs
The power-on self-test (POST), the POWER® Hypervisor
™
(PHYP), and the service processor
write errors to the Bull Blade Chassis - Enterprise management module event log.
Select the Monitors
→
Event Log option in the management module Web interface to view
entries that are currently stored in the management-module event log. This log includes
entries for events that are detected by the blade servers. The log displays the most recent
entries first.
The following table shows the syntax of a nine-word B700xxxx SRC as it might be
displayed in the event log of the management module.
The first word of the SRC in this example is the message identifier, B7001111. This
example numbers each word after the first word to show relative word positions.
The seventh word is the direct select address, which is 77777777 in the example.
Table 2-27.
Nine-word system reference code in the management-module event log
Index Sev Source Date/Time Text
1 E Blade_05
01/21/2008,
17:15:14 (ESCALA BL460 -BC1BLD5E) SYS F/W: Error. Replace
UNKNOWN (5008FECF B7001111 22222222 33333333
44444444 55555555 66666666 77777777 88888888
99999999)
Depending on your operating system and the utilities you have installed, error messages
might also be stored in an operating system log. See the documentation that comes with
the operating system for more information.
See the Management Module User’s Guide for more information about the event log.