Bull Escala BL460, Problem Determination And Service Manual, Page: 111 / 266

Chapter 2. Diagnostics
91
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
theremaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
CA00E156 Create plug-in PCI bridge node
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E15B
Transfer control to operating system
(service mode boot)
Go to “ Boot problem resolution ” on page 156 .
CA00E15F Adapter VPD evaluation
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E170 Start of PCI bus probe
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E172 First pass of PCI device probe
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E174 Establishing host connection
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “
Checkout procedure
” on page
148 .
b. Replace the system-board and chassis
assembly, as described in “
Replacing the
Tier 2 system-board and chassis
assembly
” on page 229 .
CA00E175 Bootp request
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “
Checkout procedure
” on page
148 .
b. Replace the system-board and chassis
assembly, as described in “
Replacing the
Tier 2 system-board and chassis
assembly
” on page 229 .