Bull Escala BL460, Problem Determination And Service Manual, Page: 142 / 266

122
Escala BL460 - Problem Determination and Service Guide
SRN FFC
Description and Action
252B-719 252B
Device bus termination power lost or not detected.
1. Check the management-module event log. If an error was recorded by the system, see
“ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
252B-720 252B
Adapter detected device bus failure.
1. Check the management-module event log. If an error was recorded by the system, see
“ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
252B-721 252B
Temporary adapter detected device bus failure.
1. Check the management-module event log. If an error was recorded by the system, see
“ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
252B-722 252B
Device bus interface problem.
1. Check the management-module event log. If an error was recorded by the system, see
“ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
252B-723 252B
Device bus interface problem.
1. Check the management-module event log. If an error was recorded by the system, see
“ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.
254E-201 254E 221 Adapter configuration error. Go to “ Performing the checkout procedure ” on page 149 .
254E-601 254
Error log analysis indicates adapter failure. Go to “ Performing the checkout procedure ” on
page 149 .
254E-602 254
Error log analysis indicates an error attention condition. Go to “ Performing the checkout
procedure ” on page 149 .
254E-603 254
Error log analysis indicates that the microcode could not be loaded on the adapter. Go to
“ Performing the checkout procedure ” on page 149 .
254E-604 254
Error log analysis indicates a permanent adapter failure. Go to “ Performing the checkout
procedure ” on page 149 .
254E-605 254
Error log analysis indicates permanent adapter failure is reported on the other port of this
adapter. Go to “ Performing the checkout procedure ” on page 149 .
254E-606 254
Error log analysis indicates adapter failure. Go to “ Performing the checkout procedure ” on
page 149 .
254E-701 254E 221
Error log analysis indicates permanent adapter failure. Go to “ Performing the checkout
procedure ” on page 149 .
254E-702 254E 221
Error log analysis indicates permanent adapter failure is reported on the other port of this
adapter. Go to “ Performing the checkout procedure ” on page 149 .
2567-xxx
2567
USB integrated system-board and chassis assembly. Go to “ Performing the checkout
procedure ” on page 149 .
256D-201 256D 221
Adapter configuration error.
1. Check the management-module event log. If an error was recorded by the system, see
“ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board and chassis assembly.