Bull Escala BL460, Problem Determination And Service Manual, Page: 38 / 266

18
Escala BL460 - Problem Determination and Service Guide
2.3 Location codes
Location codes identify components of the blade server. Location codes are displayed with
some error codes to identify the blade server component that is causing the error.
See “ System-board connectors ” on page 12 for component locations.
Notes
•
Location codes do not indicate the location of the blade server within the Bull Blade
Chassis - Enterprise. The codes identify components of the blade server only.
• For checkpoints with no associated location code, see “ Light path diagnostics ” on
page 182 to identify the failing component when there is a hang condition.
•
For checkpoints with location codes, use the following table to identify the failing
component when there is a hang condition.
• For 8-digit codes not listed in Table 1, see
“
Checkout procedure
” on page 148.
Table 2-1. Location code
Location code Component
U n location codes are for enclosure and VPD locations.
U n = Utttt.mmm.sssssss
tttt = system machine type
mmm = system model number
sssssss = system serial number
Un-Px-C1 DIMM 1
Un-Px-C2 DIMM 2
Un-Px-C3 DIMM 3
Un-Px-C4 DIMM 4
Un-Px-C5 DIMM 5
Un-Px-C6 DIMM 6
Un-Px-C7 DIMM 7
Un-Px-C8 DIMM 8
Un-Px-C9 Management card
Un-Px-C11 PCIe high-speed expansion card
Un-Px-C12 CIOv high speed 1Xe expansion card
Un-Px-D1 SAS hard disk drive or SAS solid state drive
Un-P1-E1 Battery
Um codes are for firmware. The format is the same as for a Un location code.
Um = Utttt.mmm.sssssss
Um-Y1 Firmware version