Bull Escala BL460, Problem Determination And Service Manual, Page: 112 / 266

92
Escala BL460 - Problem Determination and Service Guide
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
theremaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
CA00E176 TFTP file transfer
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “
Checkout procedure
” on page
148 .
b. Replace the system-board and chassis
assembly, as described in “
Replacing the
Tier 2 system-board and chassis
assembly
” on page 229 .
CA00E177
Transfer failure due to TFTP error
condition
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “
Checkout procedure
” on page
148 .
b. Replace the system-board and chassis
assembly, as described in “
Replacing the
Tier 2 system-board and chassis
assembly
” on page 229 .
CA00E178 Initiating TFTP file transfer
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “
Checkout procedure
” on page
148 .
b. Replace the system-board and chassis
assembly, as described in “
Replacing the
Tier 2 system-board and chassis
assembly
” on page 229 .
CA00E179 Closing BOOTP
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “
Checkout procedure
” on page
148 .
b. Replace the system-board and chassis
assembly, as described in “
Replacing the
Tier 2 system-board and chassis
assembly
” on page 229 .