Bull Escala BL460, Problem Determination And Service Manual, Page: 148 / 266

128
Escala BL460 - Problem Determination and Service Guide
SRN Description FRU/action
A01-07x System bus parity error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A01-08x System bus protocol/transfer error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-00x
Error log analysis indicates an error detected
by the memory controller, but the failure
could not be isolated.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-01x Uncorrectable Memory Error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-03x Correctable error threshold exceeded.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-04x Memory Control subsystem internal error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-05x
Memory Address Error (invalid address or
access attempt).
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-06x
Memory Data error (Bad data going to
memory).
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-09x System bus parity error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-10x System bus time-out error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-11x System bus protocol/transfer error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A02-12x I/O Host Bridge time-out error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.