Bull Escala BL460, Problem Determination And Service Manual, Page: 58 / 266

38
Escala BL460 - Problem Determination and Service Guide
•
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
B200 xxxx
Error codes
Description Action
B215
A problem occurred after a partition ended
abnormally.
There was a communications problem
between this partition’s service processor
and the platform’s service processor.
Restart the platform.
C1F0
An internal system firmware error occurred
during a partition shutdown or a restart.
Go to “ Firmware problem isolation ” on page 185 .
D150
A partition ended abnormally; there was a
communications problem between this
partition and the code that handles
resource allocation.
Check for server firmware updates; then, install the updates
if available.
E0AA
A problem occurred during the power off of
a partition.
Go to “ Firmware problem isolation ” on page 185 .
F001
A problem occurred during the startup of a
partition. An operation has timed out.
Look for other errors and resolve them.
F003
During the startup of a partition, the
partition processor(s) did not start
the firmware within the time-out window.
Collect the partition dump information; then, go to
“ Firmware problem isolation ” on page 185 .
F004 Informational system log entry only. No corrective action is required.
F005 Informational system log entry only. No corrective action is required.
F006
During the startup of a partition, the code
load operation for the partition startup
timed out.
1. Check the error logs and take the actions for the error
codes that are found.
2. Go to “ Firmware problem isolation ” on page 185 .
F007
During a shutdown of the partition, a time-
out occurred while trying to stop a
partition.
Check for server firmware updates; then, install the updates
if available.
F008 Informational system log entry only. No corrective action is required.
F009 Informational system log entry only. No corrective action is required.
F00A Informational system log entry only. No corrective action is required.
F00B Informational system log entry only. No corrective action is required.
F00C Informational system log entry only. No corrective action is required.
F00D Informational system log entry only. No corrective action is required.
2.4.1.9 B700xxxx Licensed internal code SRCs
A B700xxxx system reference code (SRC) is an error code that is related to licensed
internal code.
Table 2-12 describes the error codes that may be displayed if POST detects a problem.
Suggested actions to correct the problem are also described.
Note For problems persisting after completing the suggested actions, see “ Checkout procedure ”
on page 148 and “ Solving undetermined problems ” on page 194 .