Bull Escala BL460, Problem Determination And Service Manual, Page: 95 / 266

Chapter 2. Diagnostics
75
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
there maining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
C1009x5E Processor AVP L2 test case in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x60 Processor random data test in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x64
Processor enable machine check test in
progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x66 Concurrent initialization in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x68
Processor fabric initialization step in
progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x6C
Processor PSI initialization step in
progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x70
ASIC CFAM initialization step in
progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x74 ASIC mask attentions being set up
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x78 ASIC check rings being set up
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x7C ASIC ABIST test being run
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x80 ASIC LBIST test being run
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x82 ASIC RGC being reset
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x84 ASIC being flushed
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .