Bull Escala BL460, Problem Determination And Service Manual, Page: 101 / 266

Chapter 2. Diagnostics
81
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
theremaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
C2002450 Waiting for power on of slots to
complete
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C20024FF End powering on slots
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2002500 Begin power on VIO slots
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C20025FF End powering on VIO slots
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2003100 Validating ISL command parameters
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2003111 Waiting for bus object to become
operational
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2003112 Waiting for bus unit to become
disabled
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2003115 Waiting for creation of bus object
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2003150 Sending ISL command to bus unit
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C20031FF Waiting for ISL command completion
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C20032FF ISL command complete successfully
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2003300 Start SoftPOR of a failed ISL slot
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2003350 Waiting for SoftPOR of a failed ISL
slot
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .