Bull Escala BL460, Problem Determination And Service Manual, Page: 48 / 266

28
Escala BL460 - Problem Determination and Service Guide
2.4.1.5 A700yyyy Licensed internal code SRCs
An A7xx SRC is a licensed internal code SRC that is deprecated in favor of a
corresponding B7xx SRC. B7xx SRCs are described in “ B700xxxx Licensed internal code
SRCs ” on page 38 .
Table 2-8. A700yyyy Licensed internal code SRCs
Attention code Description Action
A7003000
A user-initiated platform dump occurred. No service action required.
A700yyyy
See the description for the B700yyyy error code
with the same yyyy value.
Perform the action in the B700yyyy error code
with the same yyyy value.
2.4.1.6 AA00E1A8 to AA260005 Partition firmware attention codes
AAxx attention codes provide information about the next target state for the platform
firmware. These codes might indicate that you need to perform an action.
Table 2-9 describes the partitioning firmware codes that may be displayed if POST detects
a problem. Each message description includes a suggested action to correct the problem.
Table 2-9. AA00E1A8 to AA260005 Partition firmware attention codes
•
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
• See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Attention
code
Description
Action
AA00E1A8
The system is booting to the
open firmware prompt.
At the open firmware prompt, type dev /packages/gui obe and press
Enter; then, type 1 to select SMS Menu.
AA00E1A9
The system is booting to the
System Management Services
(SMS) menus.
1. If the system or partition returns to the SMS menus after a boot
attempt failed, use the SMS menus to check the progress indicator
history for a BAxx xxxx error, which may indicate why the boot
attempt failed. Follow the actions for that error code to resolve the
boot problem.
2. Use the SMS menus to establish the boot list and restart the blade
server.
AA00E1B0
Waiting for the user to select the
language and keyboard. The
menu should be visible on the
console.
1. Check for server firmware updates.
2. Apply any available updates.
3. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as described
in “
Replacing the Tier 2 system-board and chassis
assembly
” on page 229 .
AA00E1B1
Waiting for the user to accept or
decline the license
1. Check for server firmware updates.
2. Apply any available updates.
3. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as described
in “
Replacing the Tier 2 system-board and chassis
assembly
” on page 229 .