Bull Escala BL460, Problem Determination And Service Manual, Page: 97 / 266

Chapter 2. Diagnostics
77
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
there maining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
C1009xB4
ASIC DRAM initialization step in
progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xB8
ASIC memory diagnostic step in
progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xB9 PSI diagnostic step in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xBB Restore L3 line delete step in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xBD AVP memory test case in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xC0
Node interface alignment procedure in
progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xC4 Dump initialization step in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xC8 Start PRD step in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xCC
Message passing waiting period has
begun
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xD0
Message passing waiting period has
begun
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009xD4 Starting elastic interface calibration
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C103A1xx
Hypervisor code modules are being
transferred to system storage
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C103A2xx
Hypervisor data areas are being built in
system storage
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .