Buffalo TeraStation 3010, User Manual

Page: 226 / 229

225
Chapter 10 Appendix
Code Description Corrective Action
I33
An error occurred in replication, or
synchronization between the main
TeraStation and the backup TeraStation
failed during failover configuration.
From Settings, navigate to Backup >
Replication and click Resync to execute
resynchronization.
If you configured the subfolders’ access
restrictions to be inherited to the
replication or failover destinations, disable
them or change the destinations.
I34
A virus scan found a virus.
Delete the infected files from the
quarantine folder.
I37
The initialization process has been started
by using the USB initialization drive and
settings are being initialized.
-
I38
Settings initialization is completed. -
I40
Beginning settings initialization. All data
on the drive in slot 1 will be deleted.
-
I41
Press the function button to start the
settings initialization process.
-
I42
Preparing to start the settings initialization
process.
-
I43
The TeraStation was started from the USB
initialization drive, but the settings cannot
be initialized from this USB initialization
drive.
-
I44
Initialization from the USB initialization
drive was initiated, but the drive in slot 1
was not detected.
Make sure that the drive in slot 1 is present
and fully inserted into its slot.
I45
Initialization failed. -
I46
Data migration or conversion (RAID
migration) is in progress.
Do not turn off the TeraStation’s power.
I47
Data migration or conversion (RAID
migration) is in progress.
Do not turn off the TeraStation’s power.
I48
This TeraStation is ready to become
the failover backup device for the main
TeraStation.
Press and hold down the function button
of the failover backup TeraStation until it
stops beeping to accept failover backup
status.
I49
The main TeraStation in the failover
configuration cannot be found. Make sure that the main TeraStation is on,
working, and connected to the network.
I50
Failover maintenance is in progress. Do not turn off the TeraStation’s power.
I51
Initializing the failover configuration. Do not turn off the TeraStation’s power.
I52
A new firmware version has been released.
Update the firmware by referring to the
“Updating the Firmware” section in chapter
7.
I54
The backup job failed.
Refer to the “Backup Logs for If Backup
Fails” section in chapter 5 and try the
respective corrective actions.
I55
Authentication during initialization of
settings failed.
Settings can only be restored for the
TeraStation whose settings were originally
saved.