6-68061-01 Rev A, December 2013
*6-68061-01*
© 2013 Quantum Corporation. All rights reserved. Quantum, the Quantum logo, DLT, DLTtape, the DLTtape logo, SuperLoader,
Scalar, DXi, StorageCare, StorNext, GoProtect, and Vision are registered trademarks of Quantum Corporation and its affiliates
in the United States and/or other countries. All other trademarks are the property of their respective owners. Quantum
specifications are subject to change.
Quantum SuperLoader 3:
Rackmount Replacement
Follow the steps in the document to replace a rackmount for your
SuperLoader 3:
To replace the rackmount, refer to the following sections:
•
Preparing to Replace the SuperLoader 3 Rackmount
•
Removing the SuperLoader 3 from the Rackmount
•
Replacing the SuperLoader 3 In a New Rackmount
•
Preparing to Replace the SuperLoader 3 Rackmount
Note:
Read this entire document before beginning any of the procedures.
Safety Precautions
Before beginning a rack mount installation, complete the following safety
precautions:
1
Lower the cabinet feet.
2
Extend the cabinet anti-tip device, if available.
3
Ensure that the cabinet and all rack mounted equipment have a reliable
ground connection.
4
If you have made any changes to the location of your SuperLoader 3, verify
that the total current of all rack mounted components (including the
