background image

Quantum SuperLoader 3: Rackmount Replacement
6-68061-01 Rev A
December 2013

10

Replacing the SuperLoader 3 In a New Rackmount

Replacing the SuperLoader 3 In a New Rackmount

Be sure you have the correct tools and parts before proceeding with these 

instructions (see 

Required Tools and Kits

 on page

 

2).

These instructions explain how to attach the SuperLoader 3 directly to the 

stationary rails of a rack.

1

Secure the help of at least one other person. At least two people are 

required to safely reinstall the SuperLoader into a rack cabinet.

WARNING:

Failure to take these safety steps may result in personal injury 

or equipment damage.

Caution:

Never remove the top cover of the SuperLoader 3. Removing 

the top cover could result in damage to the SuperLoader 3.

2

If present, install two (2) clip nuts, 1.75 in. (44.45 mm) apart, onto each of 

the four (4) rails of the rack, making sure that you install each pair of clip 

nuts at exactly the same height (see 

Figure

 

6

).

Figure 6  Installing Clip Nuts

3

Attach the appropriate SuperLoader 3 brackets (long or short depending on 

the depth of the rack and as determined in 

Step

 

8

 on page

 

9) to the rear of 

Rail

Rail

Outer covers 
of the rack

Rail

Clip nut

1.75 in 
(44.45mm)

Summary of Contents for Superloader 3













Reviews: