![background image](http://html1.mh-extra.com/html/premio/flachesan2-d5/flachesan2-d5_quick-manual_1596706001.webp)
Installation and service of this product should be conducted by a trained
personnel to avoid bodily injury from electric shock or heavy object
Observe ESD (Electrostatic Discharge) practices during integration to avoid
possible damage to the board and / or other components
FlacheSAN2-D5 Quick Guide
Version 1.00 – 2017.09.18
1.
Check the content
of the box. Please confirm that
your package contains the following:
#
Description
Image / Description
Qty
1
2U 48-Bay Enclosure
1
2
2.5” Drive Trays
48+4
3
Storage SSD (opt.)
48
4
Power Cable*
2
5
Rail Kit (optional)
1
6
Bezel (optional)
1
7
Intel S2600WT MB
(preinstalled)
1
8
6#32 IH#1 Screw Set
for MB / Riser*
1 set
9
IO Cards (optional)
1 set
10
SFF 8087-8643 cable
(preinstalled)
Used for IO cards, optionally
installed by order
12
11
IO Module (opt.)
1
12
RAID Module
(optional)
1
13
Heat sink
2
14
OS Disk (optional)
1-4
15
This quick guide
1
16
Packaging
1 set
* Inside the accessories box. If any items are missing, please contact
your authorized reseller or sales representative
2.
Get familiar with the unit.
FlacheSAN2-D5 is a 48x 2.5” 7mm SSD based storage server in
a 2U space, supporting dual Skylake processors powered by
Intel S2600WF motherboard, 6x rear Gen3 x8 FH PCIe cards,
2x LP PCIe cards, and 4-Bay 2.5” canister.
Front view of the unit
Power Button / LED:
System Status LED:
Eth0 LED:
Eth1 LED
USB Port
(Blink) System Healthy
System On
System Off
Link UP /Act
Link Down
Front Panel
ID Button / LED:
Ear Handle
NMI Button
Reset Button
ID On
ID Off
Turn the ear handle
inwards and use the index
finger to pull the unit
48x 2.5"
Drive Bay
(Blink) System Degraded
Rear view of the unit
4x 2.5" Disk
Bay for OS
PSU
LP PCIe Slot
Gen2 x4, x8 mech
LP PCIe Slot
Gen3 x8, x8 mech
FH FL PCIe Slots
Gen3 x8, x16 mech
FH HL PCIe Slots
Gen3 x8, x8 mech
NIC 1
NIC 2
VGA
Port
RJ45
Serial
USB 3.0
Ports
IPMI
Port
IOM
Slot
Expander
Serial Ports
Drive Tray
2.5" 7mm
HDD / SSD
Tray
Drive Lock
(unlocked position)
Tray Latch
Tray Handle
Drive Status LED:
(Solid) Drive Online
To unlock the drive lock:
1. Push the
drive lock
latch
inwards
2. Then pull
it upwards
(Blink) Drive Activity
(Fast Blink) Drive Locate
(Slow Blink) Rebuild
(Solid) Drive Fail
Tool-less drive tray is best used for SSDs.
It is recommended to apply M3 screws when installing HDDs
3.
Remove the top cover
by removing the 4 screws
on the sides of the unit. Remove additional screws (blue
circles) to open the middle top cover (for fan module access).
Slide the covers towards the back of the unit.
4.
Inspect the internal components
of the chassis.
FlacheSAN2-D5 system by default comes with Intel S2600WF
Skylake motherboard, an air duct, fan modules, backplanes,
IO cards for 48x SSDs with internal mini-SAS cables. Upon
request, optional items such as ROC Module, OS disk, BBU can
be provided. Note the locations of each component.
Backplane
x4
Rear 4-Bay
PSU
Fan Module x4
Motherboard
S2600WF
Air Duct
IO Card Support Bar
Riser Card x3
OCP
Module
SAS
Mod
30
m
m
M
.2
5.
Remove air duct assembly
from the chassis.
Remove two screws from the sides of the unit (red circle) and
pull the air duct / IO card support bar assembly up.
Thank you for your purchase of FlacheSAN2-D5, a 2U 48-Bay Skylake DP Storage Server!