Buffalo TeraStation 3010, User Manual

Page: 204 / 229

203
Chapter 7 Advanced Features
5
Select “User (static)” for both “Gateway Owner” and “DNS Owner” options from the drop-down list, then enter
the desired default gateway address and DNS server addresses.
6
Click OK .
Notes:
• Only one default gateway and DNS address can be configured for all LAN ports. Different network addresses
cannot be assigned to the LAN ports.
• Do not set the IP address of the same segment for all LAN ports. This may cause unstable network
communication.
• Network services such as SMB or AFP will restart when the Ethernet cable is disconnected/reconnected or if a
network issue occurs. You can specify the time to delay the restart at the “Services Restarted After” option.
• When you disable DHCP, all addresses including default gateway and DHCP server addresses cannot be assigned
automatically, even if you can select the “Assign automatically” options for them.
Mapping IP Address and Hostname
The TeraStation allows you to map an IP address and a hostname (FQDN) of another host you would like the
TeraStation to communicate with, such as the domain controller. If you configure the mapping pair, the TeraStation
can be accessed using the configured pair when name resolution is needed. Follow the procedure below to
configure FQDN mapping.
1
From Settings, click Network .
2
Click the settings icon ( ) to the right of “IP Address”.