manualshive.com logo in svg

Bosch Rexroth IndraDrive Mi KCU02, Project Planning Manual

The Bosch Rexroth IndraDrive Mi KCU02 is a state-of-the-art industrial drive controller. Unlock its full potential with the comprehensive Instruction Manual, available for free download on our website. This manual provides detailed guidance and insights to ensure smooth operation and maximum efficiency. Get yours now at manualshive.com!

Share
Download
background image

Connecting the cables

1. Take off connection cover and remove protective covering
2. Put motor power cable connector (

RLS0725

) through big opening and

plug connector (XD3, XG3) into device.
(

RHS0725

 additionally contains the connector for digital motor encoders

(XG4). With RHS0725 it is not required to connect the separate encoder

cable  and  the 

HAS05.1‑018

  dummy  cover  is  put  on  the  connection

cover.)

3. Screw on cable plate at connection cover with 2.5 Nm.
4. Put  encoder  cable  connector  (

RGS0725

)  through  small  opening  and

plug connector (XG4, XG8) into device.

5. Screw on cable plate at connection cover with 2.5 Nm.
6. Screw on connection cover with 2.5 Nm.

IndraDrive Mi Drive Systems with KCU02, KSM02,

KMS02/03, KMV03, KNK03, KLC03  

189/407

Connection points

R911335703_Edition 04 Bosch Rexroth AG

Summary of Contents for Rexroth IndraDrive Mi KCU02







































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Rexroth IndraDrive Mi KCU02

3M PX5 Series Reference Manual preview
PX5 Series
Brand: 3M Pages: 34
Watts 1717 Installation Instruction preview
1717
Brand: Watts Pages: 2
Hanbay RC Series Manual preview
RC Series
Brand: Hanbay Pages: 18
Danfoss TM70 Installation Manual preview
TM70
Brand: Danfoss Pages: 2
Danfoss IKORE Installation Manual preview
IKORE
Brand: Danfoss Pages: 2
Danfoss Ikompact User Manual preview
Ikompact
Brand: Danfoss Pages: 12
Danfoss WS103 User Manual preview
WS103
Brand: Danfoss Pages: 60
Danfoss CF-RC Instruction preview
CF-RC
Brand: Danfoss Pages: 20
L. G. B. 51099 Instructions preview
51099
Brand: L. G. B. Pages: 2
L-Acoustics LA4X Product Information preview
LA4X
Brand: L-Acoustics Pages: 36
Watts FEBCO 860 Small Series Installation Maintenance Repair Manual preview
FEBCO 860 Small Series
Brand: Watts Pages: 12
Bardiani Valvole BBZS5 Instruction, Use And Maintenance Manual preview
BBZS5
Brand: Bardiani Valvole Pages: 54
Parker 890CS Product Manual preview
890CS
Brand: Parker Pages: 478
Vag RIKO Operating And Maintenance Instructions Manual preview
RIKO
Brand: Vag Pages: 12
M-system R5-TS Instruction Manual preview
R5-TS
Brand: M-system Pages: 3
Quickie DX2-REM550 User Manual preview
DX2-REM550
Brand: Quickie Pages: 64
Kamstrup 66-0F-000-100 Installation Manual preview
66-0F-000-100
Brand: Kamstrup Pages: 7
Halma ZoneSense Plus AS Manual preview
ZoneSense Plus AS
Brand: Halma Pages: 58

Brands by name

Popular brands

Load more brands