4
General data and specifications
4.1
Acceptance tests and approvals
Declaration of conformity
Declarations of conformity confirm that the components comply with the valid
EN standards and EC directives. If required, our sales representative can
provide you with the declarations of conformity for components.
Drive controllers,
Supply units
Motors
CE conformity with regard
to Low-Voltage Directive
EN 61800-5-1:2007
EN 60034-1:2010+Cor.:2010
EN 60034-5:2001+A1:2007
CE conformity with regard
to EMC product standard
EN 61800-3:2004 + A1:2012
CE conformity with regard
to RoHS Directive
KCU, KSM02, KMS02, KMS03, KMV03, KLC03,
KNK03
2011/65/EU
Tab. 4-1:
CE - applied standards
C-UL-US listing
The components are listed by UL (Underwriters Laboratories Inc.®).
Proof of certification can be found online. Enter the terms "UL" and
"databases" in a search engine to get to the relevant UL web page. With the
file number you will find the proof of certification.
UL ratings
When using the component in the scope of CSA / UL, observe the
UL ratings for each component.
Only the following components have been approved in the scope
of CSA / UL for supplying KSM and KMS components:
●
HMV01.1E
●
HMV01.1R
●
HMV02.1R
●
HCS01.1E
●
HCS02.1E
●
HCS03.1E
●
KMV03.1R
HMV and HCS additionally require a KCU control module.
Make sure that the specified short-circuit current rating SCCR is
not exceeded, e.g. by providing appropriate fuses in the mains
connection of the supply unit.
UL wiring material
In the scope of CSA / UL, use copper 60/75 °C only; class 1 or
equivalent only.
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
45/407
General data and specifications
R911335703_Edition 04 Bosch Rexroth AG
