Berner BACCS-18V, Instruction Manual, Page: 29 / 276

29
E N G L I S H
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect the
charger from the AC outlet before cleaning.
Dirt and grease may be removed from the
exterior of the charger using a cloth or soft
non-metallic brush. Do not use water or any
cleaning solutions.
Optional Accessories
WARNING: Since accessories, other than
those offered by Berner, have not been tested
with this product, use of such accessories
with this tool could be hazardous. To reduce
the risk of injury, only Berner, recommended
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you fi nd one day that your Berner product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
Rechargeable Battery Pack
This long life battery pack must be recharged when it
fails to produce suffi cient power on jobs which were
easily done before. At the end of its technical life,
discard it with due care for our environment:
•
Run the battery pack down completely, then
remove it from the tool.
• Li-Ion, NiCd and NiMH cells are recyclable. Take
them to your dealer or a local recycling station. The
collected battery packs will be recycled or disposed
of properly.
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently
checked before being dispatched from the
manufacturing plant. If, despite this fact, there are
any defects, please send the item directly to our
Client Services Headquarters or to the nearest
service repair shop of the fi rm Berner.
The guarantee period is 36 months and starts from
the day of purchase, which must be proved by
the original of the purchase document. During the
guarantee period the producer guarantees:
•
free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement is that these are material and/or
manufacturing defects and that there has not
been any inappropriate operation [of the machine].
Furthermore, only original accessory parts may
be used, which Berner has expressly identifi ed as
suitable for the operation with Berner machines.
The addresses of repair workshops are given on the
reverse side.