FSN Series • User’s Guide
265
7. Operations
Quick Setup and Operations
16. Save system configuration
— After completing all “system” setups, save the
configuration and back up the system.
~
~
17. Set up Aux bus routes
— As required, set up all Aux bus routes to peripheral
destinations. (“
18. Set up transition rates
— As required, set up all transition rates for all banks and
FTB. (“
Setting Transition Rates and Curves
19. Set up wipes
— Select the desired wipe patterns, and adjust direction and border
type. (“
,” page 286.)
20. Set up keys
— Select the desired key sources, and adjust type, fill, clip, gain and
opacity as required. (“
,” page 287.)
21. Set up memory registers
— Set up the desired “looks” for your show, and store
them in memory registers as required. (“
,”
22. Ready to roll
— With all output, input and system configurations saved, and all of
your important “looks” stored in memory, put on your headsets and get busy!
Note
For detailed system operating procedures, specific system
“tweaks” and operating descriptions on every feature, please
start with the “
” section on
page 266, and select the function that you wish to perform.