294
FSN Series • User’s Guide
7. Operations
Working with Memory Registers
7.
Enter the desired description and press
{Enter}
.
8.
Press
ENTER
on the
Keypad
. The register is now stored, all Enables are on, and
the custom name has been stored with the register. Above the
Keypad
, the
selected register number and the custom name appear in the
Memory Display
,
adjacent to the prefix “
STR:
”
píçêÉI=pÉí=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ
Use the following steps to store a memory register, set Enables, and enter a custom
register name:
1.
Set up the switcher in the exact configuration that you want stored.
2.
On the
Keypad
, press
STORE
.
3.
Select the desired modules to include in the register.
4.
Enter the desired register number.
5.
Navigate to the
Memory Menu
. The selected register will be highlighted in the
table, and the “
STORE
” banner will be lit red.
6.
Press
{Enables}
to display the
Enables Menu
.
7.
On the modules row, press the light blue button for the first module in which you
want to set Enables.
8.
In the “Enables” box, toggle the desired Enables on or off, as required. By default,
they are all on, when you first store a register. Remember that you can also use
the
{All On}
and
{All Off}
functions.
9.
Repeat steps
7
and
8
for all remaining modules in which you want to set Enables.
10.
Press
{Description}
to display the
Keyboard
.
11.
Enter the desired register description and press
{Enter}
.
12.
Press
ENTER
on the
Keypad
. The register is now stored, the Enables are set,
and the custom name has been stored with the register. Above the
Keypad
, the
selected register number and the custom name appear in the
Memory Display
,
adjacent to the prefix “
STR:
”
jÉãçêó=píçêÉ=kçíÉë
Please note the following important points regarding memory register storage:
•
If you are in the midst of a
Store
procedure, the
{Advanced}
button is grayed out.
This feature prevents you from locking, unlocking, or deleting registers in the
midst of the procedure.
•
At any point, prior to pressing
ENTER
, you can add or remove modules within a
pending
Store
operation — even if the module buttons were not originally
selected in the Keypad’s
Module Section
.
Note
In
Store Mode
, the description will not appear in the register
table until
ENTER
is pressed on the
Keypad
.
Note
In
Store Mode
, the description will not appear in the register
table until
ENTER
is pressed on the
Keypad
.
