FSN Series • User’s Guide
105
4. Installation
Card and I/O Installation
`~êÇ=fåëÉêíáçå
To insert a card:
1.
Use
on page 103 to verify the slots in which the card can be installed.
2.
Once verified, open the chassis front door and remove it (if desired). In
Chapter 2, refer to the “
” section on page 31 for details.
3.
Orient the card so that the label (e.g.,
UIC
or
NIC
) is at the top. Ensure that both
ejectors are unlatched from the slots in the card’s front plate.
4.
Once unlatched, hold the top ejector up, as shown below. The bottom ejector will
automatically fall away from the front of the card.
Figure 4-11.
Ejector Orientation prior to card insertion
Hold up
Bottom Ejector
Card
top Ejector
