250
FSN Series • User’s Guide
6. System Setup
Output Test Patterns
lìíéìí=qÉëí=m~ííÉêåë
FSN Series system setup:
Step 7
(optional)
In this procedure, you can display test patterns on selected system outputs (or all system
outputs), typically for purposes of setting up external devices.
S
Prerequisite
— Ensure that you are familiar with the
Output Test Patterns
Menu
. In Chapter 5, refer to the “
Use the following steps to select and display output test patterns:
1.
In the
Menu Bar
, press
{System}
to access the
System Menu
.
2.
Press
{Output Test Patterns}
to display the
Output Test Patterns Menu
.
3.
To display a test pattern on one output:
a.
Press the desired output connector in the
Rear I/O View
on the left side
of the menu.
b.
Press the desired test pattern in the matrix on the right side of the menu.
c.
Press
{Raster Box}
to enable or disable the raster box as desired.
d.
When complete, press
{Off}
to turn the test pattern off.
4.
To display a test pattern on all outputs:
a.
Press
{Select All Outputs}
.
b.
Press the desired test pattern in the matrix on the right side of the menu.
c.
Press
{Raster Box}
to enable or disable the raster box as desired.
d.
When complete, press
{All Off}
.
7
Note
Remember that you can set a different test pattern on each
output.
Important
Ensure that you press
{All Off}
after you have finished using
any output test pattern.
