![background image](http://html1.mh-extra.com/html/barco/fsn-series/fsn-series_user-manual_3894029089.webp)
FSN Series • User’s Guide
89
3. Control Panel Orientation
Touch Screen Connector Panel
qçìÅÜ=pÅêÉÉå=`çååÉÅíçê=m~åÉä
The figure below illustrates the connector panel on the bottom of the
Touch Screen
:
Figure 3-25.
Touch Screen Connector Panel
Following are descriptions of each connector:
1)
USB Port
One
USB Port
is provided for the Touch Screen’s data input from the control
panel. Use the supplied cable harness for interconnection.
2) DVI
Connector
One
DVI
connector is provided for the Touch Screen’s video input from the control
panel. Use
the supplied cable harness for interconnection. In Appendix A, refer
to the “
” section on page 315 for pinout details.
3) DC Power In
One
DC Power In
connector is provided for the Touch Screen’s power input. Use
the supplied cable harness for interconnection.
1
2
3
Touch Screen Rear
Touch Screen Bottom
Touch Screen Front
Touch Screen Knobs
1)
2)
3)
Note
This is a digital only input. There are no analog components
on the cable.