138
FSN Series • User’s Guide
5. Menu Orientation
Wipe Menu
táéÉ=jÉåì=^ÅÅÉëë
There are two ways to access the
Wipe Menu
:
•
In the
Menu Bar
, press
{Page}
to display page
1
(if required). Then, press the
{Wipes}
button. The parameters for the last selected or modified wipe are
displayed.
•
Press and hold any
WIPE
button on the control panel (e.g.,
WIPE
in the M/E 1
bank or the PGM bank). The parameters for that specific location are displayed,
and named in the menu’s
Title Bar
(e.g.,
Wipe Menu: M/E 1
).
táéÉ=m~ííÉêåë
The
Palette
provides a matrix of Wipe pattern buttons, which are all mutually exclusive.
When a wipe button is pressed, the button is highlighted with a yellow border, and the
selected pattern is now available for use and modification on the selected bank.
When you perform a wipe, video on the
BG
bus is replaced by video on the
PST
bus, using
the selected pattern to “reveal” PST bus video. Each button represents the split between
BG
and
PST
video, with the
T-Bar
at approximately 50%, as shown below:
Figure 5-28.
Wipe button representation
táéÉ=cìåÅíáçåë=~åÇ=jçÇáÑáÉêë
In the
Wipe Menu
, the buttons on the
Tool Bar
and in the
Palette
allow you to modify the
wipe pattern in a variety of creative ways.
The following modifiers are discussed:
•
•
•
•
BG
PST
Important
All wipe modifiers are additive. This means that you can
enable as many modifiers as desired for a selected pattern,
without cancelling out any previous ones.
