FSN Series • User’s Guide
285
7. Operations
Working with Mixes
•
Press any value button to display the
Keypad
. Enter the
desired “trim” value and press
{Trim +}
or
{Trim -}
as desired.
5.
Transition curves are applied when you press
AUTO TRAN
in a selected bank, or
the
FTB
button. To select transition curves:
~
For M/E 1 curve, press the
{Linear}
,
{S Curve}
,
{Exponential}
, or
{Logarithmic}
button in the row adjacent to the
M/E 1
button.
~
For the PGM bank curve, press the
{Linear}
,
{S Curve}
,
{Exponential}
,
or
{Logarithmic}
button in the row adjacent to the
PGM
button.
~
For the FTB curve, press the
{Linear}
,
{S Curve}
,
{Exponential}
, or
{Logarithmic}
button in the row adjacent to the
FTB
button.
tçêâáåÖ=ïáíÜ=jáñÉë
A
Mix
(or “dissolve”) is a transition in which one video signal fades out as another fades in.
The transition is always from the source on
PGM
(or
BG
) to the source on
PST
.
The following topics are discussed in this section:
•
•
j~åì~ä=jáñ
Use the following steps to perform a manual mix:
1.
In the
Next Transition Group
, press
BG
.
2.
On any
PST
bus, press the button for the desired “next” source. Use the
SHIFT
button if required to select a shifted source. Remember that on the PGM bank,
the
M/E
(re-entry) button can be preset in the same way.
3.
Press
MIX
.
4.
Use the
T-Bar
to perform the manual mix.
^ìíçã~íáÅ=jáñ
Use the following steps to perform an automatic mix:
1.
Set the desired auto transition rate and curve. Refer to the “
” section on page 284 for details.
2.
In the
Next Transition Group
, press
BG
.
Note
The M/E 1 transition rate applies to the buttons in the
Direct
Key Control Group
(
MIX KEY 1
and
MIX KEY 2
).
Note
Transition curves also apply to the buttons in the
Direct Key
Control Group
(
MIX KEY 1
and
MIX KEY 2
).
MIX
