FSN Series • User’s Guide
255
6. System Setup
Universal Input Setup
Use the following steps to set up universal input capture and timing parameters:
9.
Press
{Setup}
to display the
Input Setup Menu
for the selected universal input.
10.
Press
{Capture and Process}
to display the
Capture and Process Tab
.
11.
Press
{Auto Acquire}
to toggle the
Auto Acquire
mode
On
or
Off
as required.
~
When
Off
, you can manually set the resolution using the
{Input Format}
button.
~
When
On
, the system attempts to detect the resolution. When a match
is found, the format is applied and the
Format
field in the table is
updated. Once the system acquires a new format, it automatically scales
the input up (or down) to the current native resolution.
12.
If required, press
{Input Format}
to display the
Input Format Keypad
. Locate
the desired format and press
{Apply}
.
13.
Analog and DVI inputs only
— Press
{EDID Format}
to display the
EDID
Format Keypad
. Locate the desired EDID format and press
{Apply}
to program
EDID.
14.
Analog and DVI inputs only
— Press
{Color Space}
to toggle between
SMPTE
and
RGB
processing, as required.
15.
Analog inputs only
— Press
{1:1 Sampling}
to toggle the 1:1 sampling mode on
or off, as required.
16.
Analog inputs only
— Press
{Sample Phase}
, and use the
Sample Phase
control to adjust the input’s A/D converter. For optimum visual results when
adjusting high-resolution sources, output a burst test pattern from the source, and
adjust for minimum noise.
17.
Analog inputs only
— Press
{Adjust H Timing}
to adjust the image’s horizontal
timing. Use the
{H Pos}
,
{H Active}
and
{H Total}
controls as required.
18.
Analog inputs only
— Press
{Adjust V Timing}
to adjust the image’s vertical
timing. Use the
{V Pos}
and
{V Active}
controls as required.
Use the following steps to set up universal input processing parameters:
19.
Press
{Sharpness}
, and use the
Sharpness
control to set the input’s sharpness.
20.
Component, S-video and composite inputs only
— Press
{Pulldown Comp}
to toggle the
Pulldown Compensation
mode on or off, as required.
21.
Interlaced formats only
— Press
{De-Interlace}
to display the
De-Interlace
Pop-up
. Choose either
Motion Adaptive
or
Field to Frame
mode.
22.
If
Motion Adaptive
de-interlacing is selected, press
{Motion Threshold}
and use
the control to adjust the threshold of the motion adaptive de-interlacer, if required.
Use the following steps to set up universal input sizing and scaling:
23.
Press
{Sizing and Scaling}
to display the
Sizing and Scaling Tab
.
Note
If an exact match cannot be found, you may need to use
{Input Format}
button to set the format manually.
Important
This function is designed for advanced users only. Do not
program the EDID unless it is necessary.
