FSN Series • User’s Guide
249
6. System Setup
Reference Video and Output Setup
Use the following steps to set the output V-Lock mode and SDI output timing, if
desired.
6.
Press the
{Output V-Lock}
button to toggle the
Output V-Lock
mode on or off.
~
When
On
, the
{SDI Output Timing}
button appears. All native inputs
are forced to
Frame Sync
mode, and one frame of delay will be incurred
on all native inputs. In addition, on the
Input Setup Menu
, the
{Sync
Mode}
button is grayed out.
~
When
Off
, you can not set H and V offsets, and the
{Sync Mode}
button
is active on the
Input Setup Menu
. This mode provides the least
amount of delay through the switcher.
7.
If
{Output V-Lock}
is
On
, press
{SDI Output Timing}
to set
SDI
H
and
V
offsets.
Use the
{SDI H Offset}
and
{SDI V Offset}
controls to set the offsets as desired.
Note
Remember that this mode can only be set when the
Reference Input
is set to
External
.
Important
When
{Output V-Lock}
is
On
, the position of the
DSK Cut
and
DSK Fill
inputs on screen will change.
•
If the user preference “
Black on Invalid Video
” is
turned on, the DSK turns off — because of the change
in output timing.
•
If the user preference “
Black on Invalid Video
” is off,
the DSK will be visible — but in a shifted position. In
this condition, the video position can be adjusted by
changing the output timing of the DSK source itself.
Refer to the “
” section on page 260
for User Preference Setup instructions.