![background image](http://html1.mh-extra.com/html/barco/fsn-series/fsn-series_user-manual_3894029160.webp)
160
FSN Series • User’s Guide
5. Menu Orientation
Memory Menu
•
The eight right-hand columns (under the
Modules
heading) indicate which
modules are included in each register. These columns correspond to the eight
categories of modules available on the panel:
M/E 1
,
M/E 2
,
PGM
,
SYS
(System),
Cust
(Custom),
Still
,
Aux
and
DVE
. In Chapter 3, refer to the “
”
heading on page 81 for a description of each module.
Please note:
~
An “
x
” in a cell indicates that the module is included in the register. The
“
x
” does not indicate the status of the Enables within the module.
~
A blank cell indicates that the module is not part of the register.
~
If a column heading is grayed out, that module is not currently available.
•
In the table, the yellow highlight indicates the “selected” register. There are many
ways that you can select registers, including touching, scrolling with the top knob,
and pressing the
{Memory Register}
value button. Refer to the “
” section on page 166 for details on all register selection methods.
•
Press
{Description}
to display the keyboard, which enables you to enter a
register description (or name). Refer to the “
” section on
page 167 for details.
•
Press
{Enables}
to display the
Enables Menu
, which allows you to view or
modify the Enables within each module. Refer to the “
” section on page 161 for details.
•
Press
{Advanced}
to display the
Advanced Memory Menu
, which allows you to
delete registers and lock registers. Refer to the “
section on page 168 for details.
Note
The
M/E 2
,
Cust
,
Still
and
DVE
modules are not available in
release 1.0.