Barco FSN Series, User Manual

Page: 165 / 344

FSN Series • User’s Guide 165
5. Menu Orientation
Memory Menu
póëíÉã=bå~ÄäÉë
The figure below illustrates the Enables when the SYS (System) module is selected:
Figure 5-63. SYS Enables
Following are descriptions of each System Enable. Remember that each can be toggled
on or off without restriction:
•
{Input Map} — stores or recalls the panel’s current input mapping, as set on the
Map Buttons Menu . Refer to the “ Map Buttons Menu ” section on page 210 for
a menu description.
•
{All Inputs} — stores or recalls all input setup parameters (including the name)
for both native and universal inputs, as set on the
Input Setup Menu
. Refer to
the “ Input Menu ” section on page 187 for a menu description.
•
{Tally} — stores or recalls all tally settings, as set on the Tally Setup Menu .
Refer to the “ Tally Setup Menu ” section on page 214 for a menu description.
^ìñ=bå~ÄäÉë
The figure below illustrates the available Enables when the Aux module is selected:
Figure 5-64. Aux Enables
Following are descriptions of each Aux Enable. Remember that each can be toggled on or
off without restriction:
•
{Aux 1} through {Aux 6} — stores or recalls the source assignment on the
selected Aux Bus. For example, if CAM 1 is assigned to Aux 2 , that association
will be stored or recalled in the memory register.