FSN Series • User’s Guide
111
4. Installation
Signal Connections
^ìñ=lìíéìí=`çååÉÅíáçåë
Aux (auxiliary) buses are extra switching buses that allow video signals to be routed from
the FSN-1400 to external equipment such as VTRs, monitors, projectors, etc. The figure
below illustrates the Aux output connections on the
M/E
card’s I/O panel:
Figure 4-16.
Aux output connections
Use the following steps to connect Aux output signals from the FSN-1400’s
M/E
card.
1.
Connect
Aux Outputs 1
through
6
to your target auxiliary devices or monitors.
Please note the following important points:
•
All Aux outputs run at the system’s selected native output resolution. In
Chapter 6, refer to the “
Reference Video and Output Setup
” section on
page 248 for instructions on setting the native resolution.
Aux Out 1
Aux Out 2
Aux Out 3
Aux Out 4
Aux Out 5
Aux Out 6
2
CLN
Fill
PVW
PVW
PGM
CLN
1
PGM
CLN
3
4
5
6
M/E
2
Cut
PVW
M/E
1
AUX
DSK
PGM
Note
All connections use BNC cables.
