FSN Series • User’s Guide
185
5. Menu Orientation
System Menu
Two mutually exclusive points are provided for the PGM bank’s clean feed output.
•
Press
{PGM Clean}
to select the clean feed point prior to the DSK.
•
Press
{PGM Out}
to select the program output (after the DSK).
^ëëáÖå=_ìííçå
Press
{Assign Button}
to select the clean feed source that is mapped to the
ASSIGN
button in the control panel’s
Aux Section
. This feature enables you to place a clean feed
source on the
Aux Source Row
, and select it (just as you would any other available
source), and send it to an Aux bus destination.
When
{Assign Button}
is pressed, the
Palette
changes to display a different “flow-chart.”
This diagram represents the clean feed points that can be mapped to the
ASSIGN
button,
with buttons provided for each selection point.
Figure 5-79.
Clean Feed Setup Menu, Assign Button selection (sample)
One of three mutually exclusive clean feed points can be mapped to the
ASSIGN
button:
•
Press
{M/E 1 Clean 1}
to select the clean feed point prior to Keyer 1.
•
Press
{M/E 1 Clean 2}
to select the clean feed point prior to Keyer 2.
Note
The M/E 2 clean feed connection points are not available in
release 1.0.
Assign
Button
