Barco FSN Series, User Manual

Page: 81 / 344

FSN Series • User’s Guide 81
3. Control Panel Orientation
Control Panel Descriptions
jÉãçêó=pÉÅíáçå
The Memory Section enables you to store switcher setups to memory, and recall setups
from memory back to the panel. One thousand registers are provided (1 through 1000). In
Chapter 7, refer to the “
Working with Memory Registers ” section on page 291 for details.
The figure below illustrates the Memory Section .
Figure 3-20. Memory Section
Following are descriptions of each section:
1) Memory Display
The figure below illustrates the Memory Display .
Figure 3-21. Memory Display (sample)
~
The top line indicates the last memory register that was stored, e.g.,
STR: 123 . The letters STR are constant, followed by the “store” entry
register, and the register description (as entered via the Memory Menu ).
~
The bottom line indicates the last memory register that was recalled,
e.g.,
RCL: 456 . The letters RCL are constant, followed by the “recall”
register, and the register description (as entered via the Memory Menu ).
The following rules apply:
~
When you press STORE or RECALL and enter numbers from the
keypad, the appropriate register clears, and digits shift left as you type.
1) Memory Display 3) Module Section
2) Function Section 4) Keypad
STORE RECALL
7 8 9
4 5 6
1 2 3
+ / -
0 .
AUTO
TRAN
M/E 1
AUX
CUST
STILL
PGM
DVE SYS
CLEAR
TRIM -
TRIM +
ENTER
Fine
Adjust
S T R : 1 2 3 T i t l e M a i n
R C L : 4 5 6 B u m p e r 4
4
2
1
3
S T R : 1 2 3 T i t l e M a i n
R C L : 4 5 6 B u m p e r 4
Store Entry Register
Recall Entry Register