262
FSN Series • User’s Guide
6. System Setup
Backing up the System
_~ÅâáåÖ=ìé=íÜÉ=póëíÉã
FSN Series system setup:
Step 16
In this procedure, you will back up your system configuration to a USB drive.
S
Prerequisite
— Ensure that you are familiar with the
Backup and Restore
Menu
. In Chapter 5, refer to the “
Use the following steps to back up your system to a USB Drive:
1.
Ensure that your USB drive is properly inserted in the control panel’s
USB Port
.
2.
In the
Menu Bar
, press
{System}
to access the
System Menu
.
3.
Press
{Backup Restore}
to display the
Backup and Restore Menu
.
4.
Press
{Backup System}
to initiate the system backup procedure. Once the drive
is detected, you will be prompted to continue or cancel the procedure
At the conclusion of this procedure, your system is completely backed up.
16
