AudioCodes Mediapack mp-11x, User Manual

Page: 49 / 390

Version 5.2 49 August 2007
SIP User's Manual 4. Getting Started
8.
Reconnect the gateway and your PC (if necessary) to the network.
9.
Restore your PC’s IP address and subnet mask to their original settings. If necessary,
restart your PC and re-access the gateway via the Embedded Web Server with its
newly assigned IP address.
Tip:
Record and retain the IP address and subnet mask you assign the gateway.
Do the same when defining new username or password. If the Embedded
Web Server is unavailable (for example, if you’ve lost your username and
password), use the BootP/TFTP (Trivial File Transfer Protocol) configuration
utility to access the device, ‘reflash’ the load and reset the password (refer to
the
SIP Series Reference Manual
). For detailed information on using a
BootP/TFTP configuration utility to access the device).
4.3.2 Assigning an IP Address Using BootP
The procedure below describes how to assign the gateway an IP address using the
supplied BootP application. For a detailed description on using AudioCodes' BootP
application, refer to the
SIP Series Reference Manual
.
Note:
BootP procedure can also be performed using any standard compatible
BootP server.
Tip:
You can also use BootP to load the auxiliary files to the gateway (refer to the
SIP Series Reference Manual
).
¾
To assign an IP address using BootP, take these 3 steps:
1.
Open the BootP application (supplied with the gateway's software package).
2.
Add a client configuration for the gateway that you want to initialize.
3.
Press the gateway's hardware Reset button to
physically
reset the gateway so that it
uses BootP; the gateway changes its network parameters to the values provided by
the BootP.