AudioCodes Mediapack mp-11x, User Manual

Page: 273 / 390

Version 5.2 273 August 2007
SIP User's Manual 6. ini File Configuration
Table 6-3: Web and Telnet Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
DisableWebConfig
ƒ
[0]
= Enable changing parameters from Embedded Web Server
(default).
ƒ
[1]
= Operate Embedded Web Server in 'read only' mode.
HTTPport
HTTP port used for Web management (default is 80).
Telnet Parameters
TelnetServerEnable
For a description of this parameter, refer to 'Configuring the Application
Settings' on page
168 .
TelnetServerPort
For a description of this parameter, refer to 'Configuring the Application
Settings' on page
168 .
TelnetServerIdleDisconne
ct
For a description of this parameter, refer to 'Configuring the Application
Settings' on page
168 .
SSHServerEnable
For a description of this parameter, refer to 'Configuring the Application
Settings' on page
168 .
SSHServerPort
For a description of this parameter, refer to 'Configuring the Application
Settings' on page
168 .
Customizing the Web Appearance Parameters
For detailed information on customizing the Embedded Web Server interface, refer to 'Customizing
the Web Interface' on page
63 .
UseProductName
Determines whether the UserProductName text string is displayed
instead of the default product name.
ƒ
[0]
= Disabled (default).
ƒ
[1]
= Enables the display of the user-defined UserProductName text
string (in the Embedded Web Server interface and in the extracted
ini
file).
If enabled, the UserProductName text string is displayed instead of the
default product name.
UserProductName
Text string that replaces the default product name that appears in the
Embedded Web Server (upper right-hand corner) and the extracted
ini
file.
The default is 'MediaPack'.
The string can be up to 29 characters.
UseWebLogo
ƒ
[0]
= Logo image is used (default).
ƒ
[1]
= Text string is used instead of a logo image.
If enabled, AudioCodes' default logo (or any other logo defined by the
LogoFileName parameter) is replaced with a text string defined by the
WebLogoText parameter.
WebLogoText
Text string that replaces the logo image. The string can be up to 15
characters.
LogoWidth
Width (in pixels) of the logo image.
Note:
The optimal setting depends on the resolution settings.
The default value is 441, which is the width of AudioCodes' displayed
logo.