AudioCodes Mediapack mp-11x, User Manual

Page: 293 / 390

Version 5.2 293 August 2007
SIP User's Manual 6. ini File Configuration
Table 6-8: Voice Mail Configuration Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
DigitPatternInternalCall
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page
160 .
DigitPatternExternalCal
l
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page
160 .
TelDisconnectCode
For a description of this parameter, refer to 'Configuring the Voice Mail
(VM) Parameters' on page
160 .
6.5.9 PSTN Parameters
Table 6-9: PSTN Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
PlayRBTone2Tel
For a description of this parameter, refer to 'General Parameters' on
page
70 .
PlayRBTone2IP
For a description of this parameter, refer to 'General Parameters' on
page
70 .
ProgressIndicator2IP
For a description of this parameter, refer to 'General Parameters' on
page
100 .
SendMetering2IP
This parameter is now obsolete.
TimeForReorderTone
For a description of this parameter, refer to 'Configuring the FXO
Parameters' on page
156 .
DisconnectOnBusyTone
For a description of this parameter, refer to 'Configuring the FXO
Parameters' on page 156
EnableVoiceDetection
For a description of this parameter, refer to 'Configuring the FXO
Parameters' on page
156 .
ƒ
[1]
= The gatewaysends 200 OK (to INVITE) messages when
speech/fax/modem is detected.
ƒ
[0]
= The gateway sends 200 OK messages immediately after the
gateway finishes dialing (default).
Usually this feature is used only when early media is used to establish
voice path before the call is answered.
Notes:
ƒ
To activate this feature, set EnableDSPIPMDetectors to 1.
ƒ
This feature is applicable only when the protocol type is CAS.
DigitMapping
For a description of this parameter, refer to 'DTMF & Dialing Parameters'
on page
95 .